Duratrax Warhead User Manual download pdf (Page 13)

REMOVE 2-SHOE CLUTCH

1. Remove the 4mm e-clip (L) and spacer (M).

2. Remove the clutch bell (96) and clutch bell bearings (N).

3. Remove the clutch shoes (95) and spring (94) from the flywheel (92).

5. Remove the stock 2-pin

flywheel (92).

4. Remove the clutch nut/pilot

shaft (93) from the engine’s

crankshaft.

Required Tools: Flywheel Wrench (DTXC1105), Clutch Shoe Tool (DTXR1110),

Flat Blade Screwdriver (DTXR0177), Ultimate Car Wrench (DTXR1175)

4. Remove the four 3x12mm pan head screws (D) that hold the

front bumper mounts (53 &39) to the front bulkheads (19 & 20).

5. Remove the four 3x10mm flat head screws ( I) from the front

differential skid plate (41). Remove the front differential skid plate

(41) and the lower bulkhead brace (40).

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Duratrax Warhead User Manual Page 13